

UZB can be used together with Z-Way software (a license might be required) or any other third party software that uses Z-Wave Serial API. Allows switching frequencies from software.Advanced statistics about network actual usage.Extended Wakeup Notification to extend battery life time of battery-operated devices in the network.Trusted Platform module applying strong encryption.Firmware update from the OS level in the field.Optimised transmitting queue handling to speed up transmitting process.Backup and recovery function including network topology.UZB supports Z-Wave Security S2 and Smart Start technologies.Ĭompared to the standard firmware design used by almost all Z-Wave USB Sticks and other Z-Wave Host Interface hardware, the UZB firmware offers several extensions and enhancements: Windows enumerates a new COM port device but might require a device driver uzb.inf available below. Linux and Mac OSX has a built in device driver for the stick and will create a new device named like /dev/ttyACM0 (Linux) or /dev/cu.usbmodemfa131 (OSX). The device implements a virtual serial interface used by the Z-Wave application. The Silicon Labs Z-Wave Serial API specification is available to all owners of a Silicon Labs Z-Wave SDK. This stick works with all certified Z-Wave devices regardless of its vendor or date of origin. This software plus this UZB realise a static controller to manage and use Z-Wave devices of various vendors. A controller software compatible to the Silicon Labs Z-Wave Serial API (for example Z-Way) is required to use the functions of the device. This USB stick connects a PC or any other computing platform with USB interface to a wireless Z-Wave network. Please consult the instruction manual of the host software to perform a network reset (i.e.UZB is the smallest Z-Wave USB stick in the market. To do this, the host software must take control of the Z-Stick USB adapter while the Z-Stick is in SerialAPI-Mode.


The Z-Stick also can be reset to the factory defaults settings via the host software. Need to note that this procedure should only be used when the primary controller is inoperable. The Z-Stick will now be reset to its original settings, and the blue LED will solid for 2 seconds as confirmation. To do this, press and hold the Reset Button for 20 seconds and then release it. All of this takes between 20 and 30 seconds.Īt some stage, you may wish to reset all of your Z-Stick’s settings to their factory defaults. Press and hold the Reset Button, the LED will become red, then blink faster and faster then stop blinking for 2 seconds then the blue LED will solid for 2 seconds as confirmation.Unplug the Z-Stick from the USB connector and.To reset all of your Z-Stick’s settings to their factory defaults:
